Zimbra

wilso027 · #1 (**permalink**) 03-04-2007, 10:55 AM

I have read over everything on setting up DNS properly for hosting your own mail server behind NAT but I just can't get it straight. So sorry if what I am missing is obvious but I can receive email. When I try to send something to my domain I get back:

<

Code:

allan@wilsonss.com>: Host or domain name not found. Name service error for
   name=mail.wilsonss.com type=A: Host not found

Final-Recipient: rfc822; allan@wilsonss.com
Action: failed
Status: 5.0.0
Diagnostic-Code: X-Postfix; Host or domain name not found. Name service error
   for name=mail.wilsonss.com type=A: Host not found

I want mail to be deliverable to username@wilsonss.com and outgoing mail works fine. I have setup DNS on this server and here is what I get if I check my entries with dig:

Code:

[root@mail named]# dig mx wilsonss.com

; <<>> DiG 9.2.4 <<>> mx wilsonss.com
;; global options:  printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55229
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0

;; QUESTION SECTION:
;wilsonss.com.                  IN      MX

;; ANSWER SECTION:
wilsonss.com .           38400   IN      MX      10 mail.wilsonss.com.

;; AUTHORITY SECTION:
wilsonss.com.           38400   IN      NS      192.168.0.3.wilsonss.com.

;; Query time: 1 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun Mar  4 11:42:32 2007
;; MSG SIZE  rcvd: 77

Here is what I have in named.conf(this is just the last section, there is more in the file):

Code:

[root@mail named]# more /etc/named.conf
zone "wilsonss.com" {
type master;
file "/var/named/wilsonss.com.hosts";
};

Here is what is in my wilsonss.com.hosts file:

Code:

[root@mail named]# more wilsonss.com.hosts
$ttl 38400
@ IN SOA mail.wilsonss.com. root.mail.wilsonss.com. (
2006110200
10800
3600
604800
38400 )
@ IN NS 192.168.0.3
@ IN MX 10 mail.wilsonss.com.
@ IN A 192.168.0.3

I put an entry in to my hosts file:

Code:

192.168.0.3     mail.wilsonss.com    mail

And here is what I have in resolv.conf(.3 is mail server and .1 is router)

Code:

nameserver 192.168.0.3
nameserver 192.168.0.1

I am hosting the domain name with godaddy and set the mx record on their dns server to point to my routers public ip address. I know I am missing something obvious but I can't figure it out. Thanks for any help.

Allan

marcmac · #2 (**permalink**) 03-04-2007, 11:04 AM

SO you've got an MX record for wilsonss.com (mail.wilsonss.com) but there's no A record for mail.wilsonss.com (that entry in your hosts file doesn't count)

you need to add

mail IN A 192.168.0.3

(You can test this with host -t A mail.wilsonss.com - when it comes back with an answer, you're done).