Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Zimbra 7.1.1_GA-zmconfigd ERROR 14116-postconf

  1. #1
    Join Date
    Jun 2011
    Posts
    12
    Rep Power
    4

    Default Zimbra 7.1.1_GA-zmconfigd ERROR 14116-postconf

    Hello Forum,

    some system facts first:
    - Ubuntu 10.04 LTS,
    - Virtual Machine, Running on ESXi 4.1
    - 64 Bit
    - 3328 MB RAM
    - 4 Processors assigned
    - Zimbra 7.1.1_GA_3196.UBUNTU10_64 UBUNTU10_64 FOSS edition

    Successful installation without any issues. Changed the following during the installation
    - Alternative HTTP port as there is an existing Apache2 on the machine
    - Alternative HTTPS port
    - HTTPS only mode

    System starts up ok but when monitoring the log file

    Code:
    /opt/zimbra/log/zmconfigd.log
    the following does not look like it should be that way

    Code:
    ...
    2011-06-15 11:23:47,967 zmconfigd CRITICAL [19186-rewrites]   File "/opt/zimbra/zimbramon/pylibs/state.py", line 683, in rewriteConfig     os.unlink(to) 
    2011-06-15 11:23:47,969 zmconfigd CRITICAL [19186-rewrites]   File "/opt/zimbra/lib/jars/jython-2.5.1.jar/Lib/os.py", line 342, in remove     raise OSError(0, "couldn't delete file", path) 
    2011-06-15 11:23:47,970 zmconfigd CRITICAL [19186-rewrites] Rewrite failed: [Errno 0] couldn't delete file: '/opt/zimbra/postfix/conf/master.cf' ([Errno 0] couldn't delete file: '/opt/zimbra/postfix/conf/master.cf')
    ...
    2011-06-15 11:23:48,444 zmconfigd WARNING [19186-rewrites] Rewrote: /opt/zimbra/conf/amavisd.conf with mode 440 (0.08 sec)
    2011-06-15 11:23:48,460 zmconfigd WARNING [19186-rewrites] Rewrote: /opt/zimbra/conf/salocal.cf with mode 440 (0.02 sec)
    2011-06-15 11:23:48,710 zmconfigd ERROR [19186-postconf] Executed: /opt/zimbra/postfix/sbin/postconf -e mail_owner='postfix' returned 1 (14 - 112) (1.07 sec)
    2011-06-15 11:23:49,732 zmconfigd ERROR [19186-postconf] Executed: /opt/zimbra/postfix/sbin/postconf -e bounce_notice_recipient='postmaster' returned 1 (14 - 112) (1.02 sec)
    2011-06-15 11:23:50,746 zmconfigd ERROR [19186-postconf] Executed: /opt/zimbra/postfix/sbin/postconf -e content_filter='smtp-amavis:[127.0.0.1]:10024' returned 1 (14 - 112) (1.01 sec)
    2011-06-15 11:23:51,757 zmconfigd ERROR [19186-postconf] Executed: /opt/zimbra/postfix/sbin/postconf -e relayhost='' returned 1 (14 - 112) (1.01 sec)
    2011-06-15 11:23:52,769 zmconfigd ERROR [19186-postconf] Executed: /opt/zimbra/postfix/sbin/postconf -e smtpd_sasl_authenticated_header='no' returned 1 (14 - 112) (1.01 sec)
    2011-06-15 11:23:53,782 zmconfigd ERROR [19186-postconf] Executed: /opt/zimbra/postfix/sbin/postconf -e broken_sasl_auth_clients='yes' returned 1 (14 - 112) (1.01 sec)
    2011-06-15 11:23:54,796 zmconfigd ERROR [19186-postconf] Executed: /opt/zimbra/postfix/sbin/postconf -e minimal_backoff_time='300s' returned 1 (14 - 112) (1.01 sec)
    I do not want to flood this whole thread with all the error messages but it looks like every postconf command failing. When leaving the system up and running for a while the following is logged repeatedly

    Code:
    2011-06-15 11:25:47,813 zmconfigd CRITICAL [19186-rewrites]   File "/opt/zimbra/zimbramon/pylibs/state.py", line 683, in rewriteConfig     os.unlink(to) 
    2011-06-15 11:25:47,815 zmconfigd CRITICAL [19186-rewrites]   File "/opt/zimbra/lib/jars/jython-2.5.1.jar/Lib/os.py", line 342, in remove     raise OSError(0, "couldn't delete file", path) 
    2011-06-15 11:25:47,816 zmconfigd CRITICAL [19186-rewrites] Rewrite failed: [Errno 0] couldn't delete file: '/opt/zimbra/postfix/conf/master.cf' ([Errno 0] couldn't delete file: '/opt/zimbra/postfix/conf/master.cf')
    2011-06-15 11:25:47,818 zmconfigd WARNING [19186-MainThread] All rewrite threads completed in 0.01 sec
    2011-06-15 11:25:47,819 zmconfigd WARNING [19186-MainThread] All restarts completed in 0.00 sec
    2011-06-15 11:26:47,832 zmconfigd WARNING [19186-MainThread] Fetching All configs
    2011-06-15 11:26:48,131 zmconfigd WARNING [19186-MainThread] All configs fetched in 0.30 seconds
    2011-06-15 11:26:49,033 zmconfigd WARNING [19186-MainThread] Watchdog: service antivirus status is OK.
    2011-06-15 11:26:49,190 zmconfigd CRITICAL [19186-rewrites]   File "/opt/zimbra/zimbramon/pylibs/state.py", line 683, in rewriteConfig     os.unlink(to) 
    2011-06-15 11:26:49,190 zmconfigd CRITICAL [19186-rewrites]   File "/opt/zimbra/lib/jars/jython-2.5.1.jar/Lib/os.py", line 342, in remove     raise OSError(0, "couldn't delete file", path) 
    2011-06-15 11:26:49,191 zmconfigd CRITICAL [19186-rewrites] Rewrite failed: [Errno 0] couldn't delete file: '/opt/zimbra/postfix/conf/master.cf' ([Errno 0] couldn't delete file: '/opt/zimbra/postfix/conf/master.cf')
    When shutting down Zimbra using the regular command
    Code:
    service zimbra stop
    a stack trace of the Java VM with the following content is created on every shutdown
    Code:
    zmthrdump: Requested thread dump [PID 16142] at Wed Jun 15 11:22:44 2011
    Full thread dump Java HotSpot(TM) 64-Bit Server VM (20.0-b11 mixed mode):
    
    "DestroyJavaVM" prio=10 tid=0x00007fa5dc1f6800 nid=0x3f1b waiting on condition [0x0000000000000000]
       java.lang.Thread.State: RUNNABLE
    
    ....
    
    "pool-2-thread-1" prio=10 tid=0x00007fa5e4c04800 nid=0x3fbf runnable [0x00007fa5e246f000]
       java.lang.Thread.State: RUNNABLE
    	at java.net.PlainSocketImpl.socketAccept(Native Method)
    	at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:408)
    	- locked <0x00000000d8402b40> (a java.net.SocksSocketImpl)
    	at java.net.ServerSocket.implAccept(ServerSocket.java:462)
    	at java.net.ServerSocket.accept(ServerSocket.java:430)
    	at org.jivesoftware.wildfire.filetransfer.proxy.ProxyConnectionManager$1.run(ProxyConnectionManager.java:96)
    	at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
    	at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    	at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    	at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    	at java.lang.Thread.run(Thread.java:662)
    
    "SocketSendingTracker" daemon prio=10 tid=0x00007fa5e4cb3000 nid=0x3fbe in Object.wait() [0x00007fa5e24b0000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
    	at java.lang.Object.wait(Native Method)
    	- waiting on <0x00000000d8156788> (a org.jivesoftware.wildfire.net.SocketSendingTracker$1)
    	at org.jivesoftware.wildfire.net.SocketSendingTracker$1.run(SocketSendingTracker.java:78)
    	- locked <0x00000000d8156788> (a org.jivesoftware.wildfire.net.SocketSendingTracker$1)
    
    "Secure Socket Listener" daemon prio=10 tid=0x00007fa5e4d3a800 nid=0x3fbd runnable [0x00007fa5e24f1000]
       java.lang.Thread.State: RUNNABLE
    	at java.net.PlainSocketImpl.socketAccept(Native Method)
    	at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:408)
    	- locked <0x00000000d8156898> (a java.net.SocksSocketImpl)
    	at java.net.ServerSocket.implAccept(ServerSocket.java:462)
    	at com.sun.net.ssl.internal.ssl.SSLServerSocketImpl.accept(SSLServerSocketImpl.java:261)
    	at org.jivesoftware.wildfire.net.SSLSocketAcceptThread.run(SSLSocketAcceptThread.java:148)
    
    "Secure Socket Listener" daemon prio=10 tid=0x00007fa5e4144800 nid=0x3fb9 runnable [0x00007fa5e25f5000]
       java.lang.Thread.State: RUNNABLE
    	at java.net.PlainSocketImpl.socketAccept(Native Method)
    	at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:408)
    	- locked <0x00000000d816b908> (a java.net.SocksSocketImpl)
    	at java.net.ServerSocket.implAccept(ServerSocket.java:462)
    	at com.sun.net.ssl.internal.ssl.SSLServerSocketImpl.accept(SSLServerSocketImpl.java:261)
    	at org.jivesoftware.wildfire.net.SSLSocketAcceptThread.run(SSLSocketAcceptThread.java:148)
    
    "Auditor" prio=10 tid=0x00007fa5e4799000 nid=0x3fb8 in Object.wait() [0x00007fa5e2636000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
    	at java.lang.Object.wait(Native Method)
    	- waiting on <0x00000000d8402d88> (a java.util.TaskQueue)
    	at java.util.TimerThread.mainLoop(Timer.java:509)
    	- locked <0x00000000d8402d88> (a java.util.TaskQueue)
    	at java.util.TimerThread.run(Timer.java:462)
    
    "MUC cleanup" prio=10 tid=0x00007fa5e4596800 nid=0x3fb7 in Object.wait() [0x00007fa5e2677000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
    	at java.lang.Object.wait(Native Method)
    	- waiting on <0x00000000d8402e50> (a java.util.TaskQueue)
    	at java.util.TimerThread.mainLoop(Timer.java:509)
    	- locked <0x00000000d8402e50> (a java.util.TaskQueue)
    	at java.util.TimerThread.run(Timer.java:462)
    
    "Sessions cleanup" prio=10 tid=0x00007fa5e4c19000 nid=0x3fb4 in Object.wait() [0x00007fa5e26b8000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
    	at java.lang.Object.wait(Native Method)
    	- waiting on <0x00000000d8404270> (a java.util.TaskQueue)
    	at java.util.TimerThread.mainLoop(Timer.java:509)
    	- locked <0x00000000d8404270> (a java.util.TaskQueue)
    	at java.util.TimerThread.run(Timer.java:462)
    
    "PooledByteBufferExpirer-0" daemon prio=10 tid=0x00007fa5e41bf800 nid=0x3fb2 waiting on condition [0x00007fa5e26f9000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
    	at java.lang.Thread.sleep(Native Method)
    	at org.apache.mina.common.PooledByteBufferAllocator$Expirer.run(PooledByteBufferAllocator.java:249)
    
    "FileLogWriter.FsyncThread" prio=10 tid=0x00007fa5e4d0b000 nid=0x3fb1 waiting on condition [0x00007fa5e273a000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
    	at java.lang.Thread.sleep(Native Method)
    	at com.zimbra.cs.redolog.logger.FileLogWriter$FsyncThread.run(FileLogWriter.java:521)
    
    ....
    
    "btpool0-5 - Acceptor1 SslSelectChannelConnector@0.0.0.0:7071" prio=10 tid=0x00007fa5e4211000 nid=0x3f4a runnable [0x00007fa5e89af000]
       java.lang.Thread.State: RUNNABLE
    	at sun.nio.ch.EPollArrayWrapper.epollWait(Native Method)
    	at sun.nio.ch.EPollArrayWrapper.poll(EPollArrayWrapper.java:210)
    	at sun.nio.ch.EPollSelectorImpl.doSelect(EPollSelectorImpl.java:65)
    	at sun.nio.ch.SelectorImpl.lockAndDoSelect(SelectorImpl.java:69)
    	- locked <0x00000000d82ad268> (a sun.nio.ch.Util$2)
    	- locked <0x00000000d82ad258> (a java.util.Collections$UnmodifiableSet)
    	- locked <0x00000000d82ad1d0> (a sun.nio.ch.EPollSelectorImpl)
    	at sun.nio.ch.SelectorImpl.select(SelectorImpl.java:80)
    	at org.mortbay.io.nio.SelectorManager$SelectSet.doSelect(SelectorManager.java:498)
    	at org.mortbay.io.nio.SelectorManager.doSelect(SelectorManager.java:192)
    	at org.mortbay.jetty.nio.SelectChannelConnector.accept(SelectChannelConnector.java:124)
    	at org.mortbay.jetty.AbstractConnector$Acceptor.run(AbstractConnector.java:708)
    	at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:451)
    
    "btpool0-4 - Acceptor0 SslSelectChannelConnector@0.0.0.0:7071" prio=10 tid=0x00007fa5e41fc800 nid=0x3f49 runnable [0x00007fa5e89f0000]
       java.lang.Thread.State: RUNNABLE
    	at sun.nio.ch.EPollArrayWrapper.epollWait(Native Method)
    	at sun.nio.ch.EPollArrayWrapper.poll(EPollArrayWrapper.java:210)
    	at sun.nio.ch.EPollSelectorImpl.doSelect(EPollSelectorImpl.java:65)
    	at sun.nio.ch.SelectorImpl.lockAndDoSelect(SelectorImpl.java:69)
    	- locked <0x00000000d82acd58> (a sun.nio.ch.Util$2)
    	- locked <0x00000000d82acd48> (a java.util.Collections$UnmodifiableSet)
    	- locked <0x00000000d82accc0> (a sun.nio.ch.EPollSelectorImpl)
    	at sun.nio.ch.SelectorImpl.select(SelectorImpl.java:80)
    	at org.mortbay.io.nio.SelectorManager$SelectSet.doSelect(SelectorManager.java:498)
    	at org.mortbay.io.nio.SelectorManager.doSelect(SelectorManager.java:192)
    	at org.mortbay.jetty.nio.SelectChannelConnector.accept(SelectChannelConnector.java:124)
    	at org.mortbay.jetty.AbstractConnector$Acceptor.run(AbstractConnector.java:708)
    	at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:451)
    
    ....
    
    "Low Memory Detector" daemon prio=10 tid=0x00007fa5e4001800 nid=0x3f37 runnable [0x0000000000000000]
       java.lang.Thread.State: RUNNABLE
    
    "C2 CompilerThread1" daemon prio=10 tid=0x00000000416cc800 nid=0x3f36 waiting on condition [0x0000000000000000]
       java.lang.Thread.State: RUNNABLE
    
    "C2 CompilerThread0" daemon prio=10 tid=0x00000000416ca000 nid=0x3f35 waiting on condition [0x0000000000000000]
       java.lang.Thread.State: RUNNABLE
    
    "Signal Dispatcher" daemon prio=10 tid=0x00000000416c7800 nid=0x3f34 waiting on condition [0x0000000000000000]
       java.lang.Thread.State: RUNNABLE
    
    "Surrogate Locker Thread (Concurrent GC)" daemon prio=10 tid=0x00000000416c5800 nid=0x3f33 waiting on condition [0x0000000000000000]
       java.lang.Thread.State: RUNNABLE
    
    "Finalizer" daemon prio=10 tid=0x00000000416aa000 nid=0x3f32 in Object.wait() [0x00007fa5e96d9000]
       java.lang.Thread.State: WAITING (on object monitor)
    	at java.lang.Object.wait(Native Method)
    	- waiting on <0x00000000da3070a0> (a java.lang.ref.ReferenceQueue$Lock)
    	at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
    	- locked <0x00000000da3070a0> (a java.lang.ref.ReferenceQueue$Lock)
    	at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
    	at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    
    "Reference Handler" daemon prio=10 tid=0x00000000416a2800 nid=0x3f31 in Object.wait() [0x00007fa5e971a000]
       java.lang.Thread.State: WAITING (on object monitor)
    	at java.lang.Object.wait(Native Method)
    	- waiting on <0x00000000da020848> (a java.lang.ref.Reference$Lock)
    	at java.lang.Object.wait(Object.java:485)
    	at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
    	- locked <0x00000000da020848> (a java.lang.ref.Reference$Lock)
    
    "VM Thread" prio=10 tid=0x000000004169c000 nid=0x3f30 runnable 
    
    "Gang worker#0 (Parallel GC Threads)" prio=10 tid=0x0000000041528000 nid=0x3f20 runnable 
    
    "Gang worker#1 (Parallel GC Threads)" prio=10 tid=0x000000004152a000 nid=0x3f21 runnable 
    
    "Gang worker#2 (Parallel GC Threads)" prio=10 tid=0x000000004152c000 nid=0x3f22 runnable 
    
    "Gang worker#3 (Parallel GC Threads)" prio=10 tid=0x000000004152d800 nid=0x3f23 runnable 
    
    "Concurrent Mark-Sweep GC Thread" prio=10 tid=0x00000000415bd000 nid=0x3f2b runnable 
    "VM Periodic Task Thread" prio=10 tid=0x00007fa5e400d000 nid=0x3f38 waiting on condition
    (Needed to shorten the stack trace - otherwise the text was to long to post)

    The same happens when the system is just left running for a while (Installed yesterday so I can't really say anything yet about the periods, Looks like it happens after 6 - 8 hours). Anyhow checking the status of Zimbra after a while using the command
    Code:
    service zimbra status
    shows the following
    Code:
    Unable to determine enabled services from ldap.
    Enabled services read from cache. Service list may be inaccurate.
    Host 
    	antispam                Stopped
    		zmamavisdctl is not running
    	antivirus               Stopped
    		zmamavisdctl is not running
    		zmclamdctl is not running
    	ldap                    Stopped
    	logger                  Stopped
    		zmlogswatchctl is not running
    	mailbox                 Stopped
    		mysql.server is not running.
    		zmmailboxdctl is not running.
    	mta                     Stopped
    		postfix is not running
    		zmsaslauthdctl is not running
    	snmp                    Stopped
    		zmswatch is not running.
    	spell                   Stopped
    		zmapachectl is not running
    	stats                   Stopped
    	zmconfigd               Stopped
    		zmconfigd is not running.
    As said above once this happened one can also find a new Java VM stack trace in the log directory.

    Even though the installation completed without any issues all of the above does not look so good. Does anybody have an idea of what is going on? Any help would be greatly appreciated.

    Thanks in advance.

    Sincerely

    Henning Malzahn

  2. #2
    sergioag is offline Active Member
    Join Date
    Nov 2007
    Location
    Lima-Peru
    Posts
    33
    Rep Power
    7

    Default

    You appear to have more than one problem, but the only one I seem to understand from your post is that the /opt/zimbra/postfix/conf/master.cf file is probably owned by root. It should be owned by user zimbra and group zimbra.

    Best regards,

    Sergio Aguayo

  3. #3
    Join Date
    Jun 2011
    Posts
    12
    Rep Power
    4

    Default

    Hi Sergio,

    nope - that is not the problem

    Code:
    ls -la /opt/zimbra/postfix/conf/
    
    drwxrwxr-x 2 root   postfix  4096 2011-06-15 18:53 .
    drwxr-xr-x 6 root   root     4096 2011-06-15 16:10 ..
    -rw-r--r-- 1 root   postfix 20695 2011-05-09 23:54 access
    -rw-r--r-- 1 root   postfix  8829 2011-05-09 23:54 aliases
    -rw-r--r-- 1 root   postfix  3548 2011-05-09 23:54 bounce.cf.default
    -rw-r--r-- 1 root   postfix 11681 2011-05-09 23:54 canonical
    -rw-r--r-- 1 root   postfix  9904 2011-05-09 23:54 generic
    -rw-r--r-- 1 root   postfix 19310 2011-05-09 23:54 header_checks
    -rw-r--r-- 1 root   postfix 11942 2011-05-09 23:54 LICENSE
    -rw-r--r-- 1 zimbra zimbra   2363 2011-06-15 16:25 main.cf
    -rw-r--r-- 1 root   postfix 24035 2011-05-09 23:54 main.cf.default
    -rw-r--r-- 1 root   postfix  3187 2011-05-09 23:54 makedefs.out
    -rw-rw-rw- 1 zimbra zimbra   5051 2011-06-15 16:25 master.cf
    -rw-r--r-- 1 zimbra zimbra   5195 2011-05-27 10:27 master.cf.in
    -rw-r--r-- 1 root   postfix  6816 2011-05-09 23:54 relocated
    -rw-r--r-- 1 root   postfix  1629 2011-05-09 23:54 TLS_LICENSE
    -rw-r--r-- 1 root   postfix 12549 2011-05-09 23:54 transport
    -rw-r--r-- 1 root   postfix 12494 2011-05-09 23:54 virtual
    Trying to execute a randomly picked command that is used to attempt to write the Postfix configuration file results in

    Code:
    su - zimbra -c "/opt/zimbra/postfix/sbin/postconf -e message_size_limit='10240000'"
    /opt/zimbra/postfix/sbin/postconf: fatal: open /opt/zimbra/postfix-2.7.4.2z/conf/main.cf.tmp: Permission denied

    So long

    Henning

  4. #4
    sergioag is offline Active Member
    Join Date
    Nov 2007
    Location
    Lima-Peru
    Posts
    33
    Rep Power
    7

    Default

    How are the privileges of the conf directory? They should be 775.

    Best regards,

    Sergio Aguayo

  5. #5
    Join Date
    Jun 2011
    Posts
    12
    Rep Power
    4

    Default

    Hi Sergio,

    thanks for your help! Here's the listing of the whole Postfix directory

    Code:
    ls -la /opt/zimbra/postfix/
    
    drwxr-xr-x  6 root root    4096 2011-06-15 16:10 .
    drwxr-xr-x 49 root root    4096 2011-06-15 18:02 ..
    drwxrwxr-x  2 root postfix 4096 2011-06-15 18:53 conf
    drwxr-xr-x  2 root root    4096 2011-06-15 16:10 libexec
    drwxr-xr-x  5 root root    4096 2011-06-15 16:10 man
    drwxr-xr-x  2 root root    4096 2011-06-15 16:10 sbin
    Henning

  6. #6
    sergioag is offline Active Member
    Join Date
    Nov 2007
    Location
    Lima-Peru
    Posts
    33
    Rep Power
    7

    Default

    Hi Henning

    I'm not very used to Ubuntu, but in CentOS/RHEL you had to disable SELinux. Maybe you have installed SELinux or another security module? This is because under "normal" unix rules this doesn't make sense...

    Best regards,

    Sergio Aguayo

  7. #7
    blozancic is offline Intermediate Member
    Join Date
    Aug 2008
    Posts
    21
    Rep Power
    6

    Default

    I'm getting the same issues with my Zimbra FOSS on Ubuntu 10.04 64 bit server. And this seemed to happen only after about we upgraded from 7.0.1 to 7.1.1.

  8. #8
    Join Date
    Jun 2011
    Posts
    12
    Rep Power
    4

    Default

    Sergio,

    Ubuntu uses Apparmor but as there is no profile for any of the Zimbra processes that should not be a problem. There's also not a single "audit" entry in syslog. This would be the case if there would be any violation of an Apparmor profile...

    Henning

  9. #9
    Join Date
    Jun 2011
    Posts
    12
    Rep Power
    4

    Default

    Hi blozancic,

    do you by any change know where I could download the older version that you mention? The official download page only seems to offer the current version 7.1.1 GA.

    I've just seen that there is an additional patch in that download section too. Did you try to apply that already?

    Henning

  10. #10
    Join Date
    Jun 2011
    Posts
    12
    Rep Power
    4

    Default

    Hi blozancic,

    the forrest and the trees, right?
    Obviously sitting a little bit too long in front of the screen today - just "found" the archives link on the download page.... :-)

    Henning
    Last edited by HenningMalzahn; 06-15-2011 at 11:49 AM.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [SOLVED] Clamav problem ? What's happening ?
    By aNt1X in forum Installation
    Replies: 23
    Last Post: 02-14-2008, 05:43 AM
  2. Major Issue - 5.0RC2 NE to 5.0GA NE failed
    By DougWare in forum Installation
    Replies: 7
    Last Post: 01-06-2008, 09:56 PM
  3. Zimbra shutdowns every n hours.
    By Andrewb in forum Administrators
    Replies: 13
    Last Post: 08-14-2007, 08:55 AM
  4. Can't start Zimbra!
    By zibra in forum Administrators
    Replies: 5
    Last Post: 03-22-2007, 11:34 AM
  5. zmtlsctl give LDAP error
    By sourcehound in forum Administrators
    Replies: 5
    Last Post: 03-11-2007, 03:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •