Problem With Status

[Dakam]

I'm a student in an EAST Lab setting up Zimbra, I have set it up before and it finally went down after a power outage and we've since then formatted, I thought it nice to install fedora 8 again and work on it again the same way, I preped it fixing my old problem I had with postfix, and now I can't really figure much out.

45 minutes is not enough

I'm gathering that there's something running I can't see, or these weren't installed correctly. However I doubt the installation was incorrect.

I cannot connect to Zimbra by local or anywhere else so I'm stumped.

Host mail.realhostblanked.com
antispam Running
antivirus Running
ldap Running
logger Stopped
logmysql.server is not running
mailbox Stopped
mysql.server is not running
zmmailboxdctl is not running
mta Running
snmp Running
spell Running
stats Stopped

Starting these services separately returns a message saying they've been started, however status will not reflect it, I cannot connect to zimbra either... more information if needed.

[mmorse]

zmcontrol stop, then tail -f /var/log/zimbra.log & /opt/zimbra/log/mailbox.log & zmmailboxd.out as you zmcontrol start so we can get some errors to work from.

[Dakam]

So I ran the first command and received

[zimbra@mail root]$ tail -f /var/log/zimbra.log
Apr 3 09:57:00 mail zmmailboxdmgr[3173]: threaddump requested
Apr 3 09:57:00 mail zmmailboxdmgr[3173]: stale pid 2418 found in /opt/zimbra/log/zmmailboxd.pid: No such process
Apr 3 09:57:00 mail zmmailboxdmgr[3173]: assuming no other instance is running
Apr 3 09:57:00 mail zmmailboxdmgr[3173]: no manager process is running
Apr 3 09:57:02 mail zmmailboxdmgr[3180]: stop requested
Apr 3 09:57:02 mail zmmailboxdmgr[3180]: stale pid 2418 found in /opt/zimbra/log/zmmailboxd.pid: No such process
Apr 3 09:57:02 mail zmmailboxdmgr[3180]: assuming no other instance is running
Apr 3 09:57:02 mail zmmailboxdmgr[3180]: no manager process is running
Apr 3 09:57:04 mail zimbramon[2994]: 2994:info: Stopping logger
Apr 3 09:57:34 mail zimbramon[2994]: 2994:info: Stopping ldap
Apr 3 09:58:02 mail zmmailboxdmgr[3389]: status requested
Apr 3 09:58:02 mail zmmailboxdmgr[3389]: stale pid 2418 found in /opt/zimbra/log/zmmailboxd.pid: No such process
Apr 3 09:58:02 mail zmmailboxdmgr[3389]: assuming no other instance is running
Apr 3 09:58:02 mail zmmailboxdmgr[3389]: no manager process is running
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: antispam: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: antivirus: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: ldap: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: logger: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: mailbox: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: mta: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: snmp: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: spell: Stopped
Apr 3 09:58:03 mail zimbramon[3248]: 3248:info: 2008-04-03 09:58:01, STATUS: mail.mpseast.com: stats: Stopped
Apr 3 09:58:03 mail sendmail[3289]: m33Dw2w8003289: from=zimbra, size=429, class=0, nrcpts=1, msgid=<200804031358.m33Dw2w8003289@mail.garlandcountyeast .com>, relay=zimbra@localhost
Apr 3 09:58:03 mail sendmail[3289]: m33Dw2w8003289: to=zimbra, ctladdr=zimbra (501/501), delay=00:00:01, xdelay=00:00:00, mailer=relay, pri=30429, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]

The second gave this

[zimbra@mail root]$ tail -f /opt/zimbra/log/mailbox.log
at com.mysql.jdbc.Connection.(Connection.java:1531)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonReg isteringDriver.java:266)
at java.sql.DriverManager.getConnection(DriverManager .java:582)
at java.sql.DriverManager.getConnection(DriverManager .java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFac tory.createConnection(DriverManagerConnectionFacto ry.java:97)
at org.apache.commons.dbcp.PoolableConnectionFactory. makeObject(PoolableConnectionFactory.java:300)
at org.apache.commons.pool.impl.GenericObjectPool.bor rowObject(GenericObjectPool.java:816)
at org.apache.commons.dbcp.PoolingDataSource.getConne ction(PoolingDataSource.java:140)
at com.zimbra.cs.db.DbPool.getConnection(DbPool.java: 222)
... 36 more

Finally, the Third one.

[zimbra@mail root]$ tail -f /opt/zimbra/log/zmmailboxd.out
Zimbra server reserving server socket port=995 bindaddr=null ssl=true
Zimbra server reserving server socket port=143 bindaddr=null ssl=false
Zimbra server reserving server socket port=993 bindaddr=null ssl=true
Zimbra server reserving server socket port=7025 bindaddr=null ssl=false
1150 INFO [main] log - Setting umask=027
1151 INFO [main] log - Setting GID=501
1152 INFO [main] log - Setting UID=501
1152 INFO [main] log - jetty-6.1.5
1353 INFO [main] log - No Transaction manager found - if your webapp requires one, please configure one.
Zimbra server process is running as uid=501 euid=501 gid=501 egid=501

After running zmcontrol start

[zimbra@mail root]$ zmcontrol start
Host mail.mpseast.com
Starting ldap...Done.
FAILED
/opt/zimbra/bin/ldap: line 57: kill: (26711) - No such process
/opt/zimbra/bin/ldap: line 57: kill: (26711) - No such process
/opt/zimbra/bin/ldap: line 57: kill: (26711) - No such process
/opt/zimbra/bin/ldap: line 57: kill: (26711) - No such process
/opt/zimbra/bin/ldap: line 57: kill: (26711) - No such process
/opt/zimbra/bin/ldap: line 57: kill: (26711) - No such process
/opt/zimbra/bin/ldap: line 57: kill: (26711) - No such process
Failed to start slapd. Attempting debug start to determine error.
daemon: bind(7) failed errno=99 (Cannot assign requested address)
slap_open_listener: failed on ldap://mail.mpseast.com:389

mail.mpseast is the host that we were using.

Well, If anything else is needed tell me.

[mmorse]

Still same DNS config like the thead when this was first setup?
(though I see a new garlandcountyeast.com domain in addition to mpseast.com)

What's the contents/output of:
etc/sysconfig/network
Reslove.conf
ect/hosts
& running:
dig any mpseast.com

Based on the prior http://www.zimbra.com/forums/install...p-install.html dont' forget to disable selinux.

[Dakam]

Yes, I made sure to Disable SELinux when installing, I also doublechecked so It is disabled, However I'm still not sure on that.

mpseast.com Dig

; <<>> DiG 9.4.2 <<>> mpseast.com
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 52137
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 3, ADDITIONAL: 0

;; QUESTION SECTION:
;mpseast.com. IN A

;; ANSWER SECTION:
mpseast.com. 3600 IN A 170.211.174.36

;; AUTHORITY SECTION:
mpseast.com. 172800 IN NS dns1.valueweb.com.
mpseast.com. 172800 IN NS dns2.valueweb.com.
mpseast.com. 172800 IN NS dns3.valueweb.com.

;; Query time: 481 msec
;; SERVER: 192.168.1.2#53(192.168.1.2)
;; WHEN: Sun Apr 6 10:03:51 2008
;; MSG SIZE rcvd: 111

It would be nice if I could change everything to garlandcountyeast.com but I'll need to worry about that later.

That being said, I changed the hostname in the Network Configuration GUI to mail.garlandcountyeast.com, that didn't change it with zimbra so I can be fairly certain there's a file I'd have to edit to change that.

I can't find out how to run the other commands there, so I could use some help explaining them, The one I did understand being to "dig mpseast.com".

We were initially going with mpseast.com and then I get "Switch to garlandcountyeast.com" and so I tried to run with it from there.

It doesn't matter which one we get it up on as long as we get it up on one.

Edit:
After attempting to figure out what these commands mean.

[root@mail ~]# /etc/sysconfig/network
bash: /etc/sysconfig/network: Permission denied

then I thought...

[zimbra@mail root]$ cd /etc/sysconfig/network
bash: cd: /etc/sysconfig/network: Not a directory
[zimbra@mail root]$ cd /etc/sysconfig
[zimbra@mail sysconfig]$ network
bash: network: command not found
[zimbra@mail sysconfig]$ ./network
bash: ./network: Permission denied

Maybe I should turn off my network device or something...

Edit 2:
Ran Zmcontrol status

received

[zimbra@mail root]$ zmcontrol status
Host mail.mpseast.com
antispam Running
antivirus Running
ldap Running
logger Stopped
logmysql.server is not running
mailbox Stopped
mysql.server is not running
zmmailboxdctl is not running
mta Running
snmp Running
spell Running
stats Stopped

[zimbra@mail root]$ logmysql.server start
[zimbra@mail root]$ nohup: redirecting stderr to stdout
A mysqld process already exists

[zimbra@mail root]$ zmmailboxdctl start
mailboxd started.

Ran zmcontrol status

Host mail.mpseast.com
antispam Running
antivirus Running
ldap Running
logger Stopped
logmysql.server is not running
mailbox Stopped
mysql.server is not running
zmmailboxdctl is not running
mta Running
snmp Running
spell Running
stats Stopped

Then these

[zimbra@mail root]$ mysql.server start
mysqld_safe already running with pid 2533
[zimbra@mail root]$ kill -9 2533
[zimbra@mail root]$ mysql.server start
mysqld_safe already running with pid 13848

Still confused...

[mmorse]

Originally Posted by Dakam

Edit:
After attempting to figure out what these commands mean.

[root@mail ~]# /etc/sysconfig/network
bash: /etc/sysconfig/network: Permission denied

then I thought...

[zimbra@mail root]$ cd /etc/sysconfig/network
bash: cd: /etc/sysconfig/network: Not a directory
[zimbra@mail root]$ cd /etc/sysconfig
[zimbra@mail sysconfig]$ network
bash: network: command not found
[zimbra@mail sysconfig]$ ./network
bash: ./network: Permission denied

It's a file, type the following:
more /etc/sysconfig/network
more /etc/hosts

dig mail.mpseast.com any
dig mpseast.com any

[Dakam]

ran the commands listed, received...

[zimbra@mail root]$ more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=mail.garlandcountyeast.com
[zimbra@mail root]$ more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.1.102 mail.mpseast.com
[zimbra@mail root]$ dig mail.mpseast.com any

; <<>> DiG 9.4.2 <<>> mail.mpseast.com any
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 35677
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 0, ADDITIONAL: 3

;; QUESTION SECTION:
;mail.mpseast.com. IN ANY

;; ANSWER SECTION:
mail.mpseast.com. 3600 IN A 192.168.1.102
mail.mpseast.com. 3600 IN NS eastserver.eastlab.local.
mail.mpseast.com. 3600 IN SOA eastserver.eastlab.local. hostmaster.eastlab.local. 24 900 600 86400 3600
mail.mpseast.com. 3600 IN MB mail.garlandcountyeast.com.
mail.mpseast.com. 3600 IN MX 10 mail.mpseast.com.

;; ADDITIONAL SECTION:
eastserver.eastlab.local. 3600 IN A 192.168.1.2
mail.garlandcountyeast.com. 3600 IN A 192.168.1.102
mail.mpseast.com. 3600 IN A 192.168.1.102

;; Query time: 18 msec
;; SERVER: 192.168.1.2#53(192.168.1.2)
;; WHEN: Tue Apr 8 09:52:13 2008
;; MSG SIZE rcvd: 236

[zimbra@mail root]$ dig mpseast.com any

; <<>> DiG 9.4.2 <<>> mpseast.com any
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 37729
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 3, ADDITIONAL: 3

;; QUESTION SECTION:
;mpseast.com. IN ANY

;; ANSWER SECTION:
mpseast.com. 172800 IN NS dns1.valueweb.com.
mpseast.com. 172800 IN NS dns2.valueweb.com.
mpseast.com. 172800 IN NS dns3.valueweb.com.

;; AUTHORITY SECTION:
mpseast.com. 172800 IN NS dns1.valueweb.com.
mpseast.com. 172800 IN NS dns2.valueweb.com.
mpseast.com. 172800 IN NS dns3.valueweb.com.

;; ADDITIONAL SECTION:
dns1.valueweb.com. 172800 IN A 207.36.172.5
dns2.valueweb.com. 172800 IN A 207.36.173.5
dns3.valueweb.com. 172800 IN A 207.36.174.5

;; Query time: 393 msec
;; SERVER: 192.168.1.2#53(192.168.1.2)
;; WHEN: Tue Apr 8 09:52:20 2008
;; MSG SIZE rcvd: 185

[mmorse]

Let's stick with one naming convention (mpseast)

170.211.174.36 mail.mpseast.com (public)
192.168.1.102 mail.mpseast.com (private)
that looks good

nano /etc/sysconfig/network
change mail.garlandcountyeast.com > mail.mpseast.com

nano /etc/hosts
change it so it looks like:
127.0.0.1 localhost.localdomain localhost
192.168.1.102 mail.mpseast.com mail

(then restart your network services or just restart everything)

[Dakam]

Still the same problems, but At least my hosts is fixed.

I didn't have the last mail in there...

[zimbra@mail root]$ zmcontrol status
Host mail.mpseast.com
antispam Running
antivirus Running
ldap Running
logger Stopped
logmysql.server is not running
mailbox Stopped
mysql.server is not running
zmmailboxdctl is not running
mta Running
snmp Running
spell Running
stats Stopped

[mmorse]

zmcontrol stop
ps aux | grep zimbra
kill -9 # (pid # of any remaining processes)
go move your main logfiles to .hold or something:
mv /var/log/zimbra.log /var/log/zimbra.log.hold
mv /opt/zimbra/log/mailbox.log /opt/zimbra/log/mailbox.log.hold
mv /opt/zimbra/log/zmmailboxd.out /opt/zimbra/log/zmmailboxd.out.hold
zmcontrol start
after you run zmcontrol status to see what's not running, attach those 3 logfiles to this thread