[SOLVED] GetServiceStatusRequest going to a non configured ip.

[pjanzen]

Hi All,

This is my first post and ofcourse it is a question.

My server stats are not working and in my log file I see the following.

2010-11-16 19:35:59,122 INFO [btpool0-6://192.168.1.1:7071/service/admin/soap/GetServiceStatusRequest] [name=paul@xxxxxx.xx;mid=3;ip=212.203.23x.xx;ua=Zim braWebClient - IE8 (Win);] soap - GetServiceStatusRequest

No I am puzzeld why that is as there is no 192.xxx.xxx.xxx configured on my system.

eth0      Link encap:Ethernet  HWaddr 00:50:56:b7:0b:c8
          inet addr:212.203.23x.xx  Bcast:212.203.23x.xx  Mask:255.255.2xx.xxx
          inet6 addr: fe80::250:56ff:feb7:bc8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1649 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1562 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:195910 (195.9 KB)  TX bytes:728821 (728.8 KB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:11346 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11346 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6415248 (6.4 MB)  TX bytes:6415248 (6.4 MB)

The only value in zmlocalconfig is the following.

root@zimbra:/opt/zimbra/conf# /opt/zimbra/bin/zmlocalconfig -x | grep 192
nio_imap_write_chunk_size = 8192

I have anonymized my ip address and hostname but you get the picture.

Can anyone give my some pointers on where this is configured?

Thnx.
Paul

[pjanzen]

Never mind this is a non issue.
As the admin port 7071 is not directly reacheble I have to tunnel to it. That causes my request to come from 192.168.1.1.

Paul

Originally Posted by pjanzen

Hi All,

This is my first post and ofcourse it is a question.

My server stats are not working and in my log file I see the following.

2010-11-16 19:35:59,122 INFO [btpool0-6://192.168.1.1:7071/service/admin/soap/GetServiceStatusRequest] [name=paul@xxxxxx.xx;mid=3;ip=212.203.23x.xx;ua=Zim braWebClient - IE8 (Win);] soap - GetServiceStatusRequest

No I am puzzeld why that is as there is no 192.xxx.xxx.xxx configured on my system.

eth0      Link encap:Ethernet  HWaddr 00:50:56:b7:0b:c8
          inet addr:212.203.23x.xx  Bcast:212.203.23x.xx  Mask:255.255.2xx.xxx
          inet6 addr: fe80::250:56ff:feb7:bc8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1649 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1562 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:195910 (195.9 KB)  TX bytes:728821 (728.8 KB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:11346 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11346 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6415248 (6.4 MB)  TX bytes:6415248 (6.4 MB)

The only value in zmlocalconfig is the following.

root@zimbra:/opt/zimbra/conf# /opt/zimbra/bin/zmlocalconfig -x | grep 192
nio_imap_write_chunk_size = 8192

I have anonymized my ip address and hostname but you get the picture.

Can anyone give my some pointers on where this is configured?

Thnx.
Paul