Uh my dyndnshost is not really t
i'm just not so keen on publishing the ip of a server on a public forum unless it's rock steady ...
Here the report from pingability:
Code:
Info Type Message
Information We did not find any name server records for 't.dyndns.org' but we did for 'dyndns.org.'. This probably indicates that the domain you entered is a sub-domain not a zone. That is fine.
Information t.dyndns.org./88.198.**.*** is located in Germany (DE)
Good The RDNS entry ***.**.198.88.in-addr.arpa (t.dyndns.org./88.198.**.***) points to t.dyndns.org.. t.dyndns.org. has an IP Address (A) record that matches this IP as well. Good.
Information www.t.dyndns.org is a CNAME record pointing to t.dyndns.org.
Mail Server Info
Info Type Message
Heads-up Your domain t.dyndns.org has only a single MX record 't.dyndns.org'. If you add a secondary mail server then you will still be able to accept email if your primary mail server is unavailable.
Mail Server: t.dyndns.org
Server Name t.dyndns.org
IP 88.198.**.***
Location Germany
Mail Server For *@t.dyndns.org
MX Priority 10
Connect Response Time NA
Server 'Hello' Line
Open Relay? Not tested
RDNS Entry t.dyndns.org.
Here's the logfile of the install:
Code:
Setting defaults...
Setting local config zimbra_java_home to /opt/zimbra/java
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_java_home='/opt/zimbra/java'
Done
Checking for port conflicts
ldap configuration not complete
ldap configuration not complete
ldap configuration not complete
ldap configuration not complete
ldap configuration not complete
Saving config in /opt/zimbra/config.2834...
Done
Operations logged to /tmp/zmsetup.log.2834
Setting local config values...
Setting local config zimbra_server_hostname to t.dyndns.org
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_server_hostname='t.dyndns.org'
Setting local config ldap_master_url to ldap://t.dyndns.org:389
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_master_url='ldap://t.dyndns.org:389'
Setting local config ldap_url to ldap://t.dyndns.org:389
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_url='ldap://t.dyndns.org:389'
Setting local config ldap_port to 389
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_port='389'
Setting local config ldap_host to t.dyndns.org
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_host='t.dyndns.org'
Setting local config zimbra_uid to 1000
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_uid='1000'
Setting local config zimbra_gid to 103
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_gid='103'
Setting local config zimbra_user to zimbra
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_user='zimbra'
Setting local config av_notify_user to admin@t.dyndns.org
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e av_notify_user='admin@t.dyndns.org'
Setting local config ssl_allow_untrusted_certs to TRUE
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ssl_allow_untrusted_certs='TRUE'
Setting local config mysql_memory_percent to 30
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e mysql_memory_percent='30'
Setting local config tomcat_java_heap_memory_percent to 40
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e tomcat_java_heap_memory_percent='40'
Done
Setting up CA...
*** Running as zimbra user: cd /opt/zimbra; zmcreateca
** Creating CA private key
Generating a 1024 bit RSA private key
.++++++
..........................++++++
unable to write 'random state'
writing new private key to '/opt/zimbra/ssl/ssl/ca/ca.key'
-----
** Creating CA cert
Signature ok
subject=/C=US/ST=N/A/L=N/A/O=Zimbra Collaboration Suite
Getting Private key
unable to write 'random state'
Done
Updating ldap_root_password and zimbra_ldap_passwd
Setting local config ldap_root_password to *******
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e ldap_root_password='*******'
Setting local config zimbra_ldap_password to *******
*** Running as zimbra user: /opt/zimbra/bin/zmlocalconfig -f -e zimbra_ldap_password='*******'
Fetching CA from ldap...
*** Running as zimbra user: mkdir -p /opt/zimbra/ssl/ssl/ca
Done
Creating server entry for t.dyndns.org...
*** Running as zimbra user: /opt/zimbra/bin/zmprov -l cs t.dyndns.org
ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException t.dyndns.org:389)
Done
Setting services on t.dyndns.org...
*** Running as zimbra user: /opt/zimbra/bin/zmprov -l ms t.dyndns.org
usage: modifyServer(ms) {name|id} [attr1 value1 [attr2 value2...]]
zmprov [args] [cmd] [cmd-args ...]
-h/--help display usage
-f/--file use file as input stream
-s/--server {host}[:{port}] server hostname and optional port
-l/--ldap provision via LDAP instead of SOAP
-a/--account {name} account name to auth as
-p/--password {pass} password for account
-P/--passfile {file} read password from file
-z/--zadmin use zimbra admin name/password from localconfig for admin/password
-v/--verbose verbose mode (dumps full exception stack trace)
-d/--debug debug mode (dumps SOAP messages)
zmprov is used for provisioning. Try:
zmprov help account help on account-related commands
zmprov help calendar help on calendar resource-related commands
zmprov help commands help on all commands
zmprov help config help on config-related commands
zmprov help cos help on COS-related commands
zmprov help domain help on domain-related commands
zmprov help list help on distribution list-related commands
zmprov help misc help on misc commands
zmprov help notebook help on notebook-related commands
zmprov help search help on search-related commands
zmprov help server help on server-related commands
*** Running as zimbra user: /opt/zimbra/bin/zmprov -l ms t.dyndns.org
usage: modifyServer(ms) {name|id} [attr1 value1 [attr2 value2...]]
zmprov [args] [cmd] [cmd-args ...]
-h/--help display usage
-f/--file use file as input stream
-s/--server {host}[:{port}] server hostname and optional port
-l/--ldap provision via LDAP instead of SOAP
-a/--account {name} account name to auth as
-p/--password {pass} password for account
-P/--passfile {file} read password from file
-z/--zadmin use zimbra admin name/password from localconfig for admin/password
-v/--verbose verbose mode (dumps full exception stack trace)
-d/--debug debug mode (dumps SOAP messages)
zmprov is used for provisioning. Try:
zmprov help account help on account-related commands
zmprov help calendar help on calendar resource-related commands
zmprov help commands help on all commands
zmprov help config help on config-related commands
zmprov help cos help on COS-related commands
zmprov help domain help on domain-related commands
zmprov help list help on distribution list-related commands
zmprov help misc help on misc commands
zmprov help notebook help on notebook-related commands
zmprov help search help on search-related commands
zmprov help server help on server-related commands
Done
Setting up zimbra crontab...
Done
Setting up syslog.conf...
Done
Notification skipped
Starting servers...
*** Running as zimbra user: /opt/zimbra/bin/zmcontrol start
Host t.dyndns.org
Done.
*** Running as zimbra user: /opt/zimbra/bin/zmsshkeygen
Generating public/private dsa key pair.
Your identification has been saved in /opt/zimbra/.ssh/zimbra_identity.
Your public key has been saved in /opt/zimbra/.ssh/zimbra_identity.pub.
The key fingerprint is:
48:d5:f7:a4:d8:2d:2a:01:c6:e5:e7:64:57:b9:80:41 t.dyndns.org
ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException t.dyndns.org:389)
*** Running as zimbra user: /opt/zimbra/bin/zmupdateauthkeys
ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException t.dyndns.org:389)
Updating /opt/zimbra/.ssh/authorized_keys
Operations logged to /tmp/zmsetup.log.2834 Thanks for your help!